Poppet Type Solenoid Valve:

A poppet valve is a valve consisting of a hole, usually round or oval, and a tapered plug, usually a disk shape on the end of a shaft also called a valve stem. The shaft guides the plug portion by sliding through a valve guide. In most applications a pressure differential helps to seal the valve and in some applications also open it. Presta and Schrader valves used on tires are examples of poppet valves. The Presta valve has no spring and relies on a pressure differential for opening and closing while being inflated. Contact Patcon Pneumatics and get Produces quality Poppet Type Solenoid Valve and Direct Acting Solenoid Valve from www.patconpneumatics.com

Orifice Plate:

An orifice plate is basically a thin plate with a hole in the middle. It is usually placed in a pipe in which fluid flows. As fluid flows through the pipe, it has a certain velocity and a certain pressure. When the fluid reaches the orifice plate, with the hole in the middle, the fluid is forced to converge to go through the small hole; the point of maximum convergence actually occurs shortly downstream of the physical orifice, at the so-called vena contracta point (see drawing to the right). As it does so, the velocity and the pressure changes. Beyond the vena contracta, the fluid expands and the velocity and pressure change once again. By measuring the difference in fluid pressure between the normal pipe section and at the vena contracta, the volumetric and mass flow rates can be obtained from Bernoulli's equation. Find best designing of Bleed Rings, Flow Nozzles and Orifice Flange from www.triflotech.com.

Power Press Machine:

A press, or a machine press is a tool used to work metal (typically steel) by changing its shape and internal structure. A forge press reforms the workpiece into a three dimensional object—not only changing its visible shape but also the internal structure of the material. A stronger part results from this process than if the object was machined. Bending is a typical operation performed and occurs by a machine pressing, or applying direct pressure, to the material and forcing it to change shape. A press brake is a typical machine for this operation. Ajmera Machines provides high quality Boring Machine, Power Press Machine and Sliding Head Machine

Rebar Fabrication:

Reinforcing Steel fabrication is a massive job, for this we offer special equipment which is Productive, User friendly, Cost effective and Safety ensured. Get machines for Rebar Fabrication from www.consolidatedmachines.net